CALIBRE™ 2061-6
Polycarbonate Resin

Styron LLC  
    
 Technical Data   
    

产品说明
CALIBRE™ 2061-6 resin is suitable for steam and ethylene oxide sterilization required by the health care industry.
CALIBRE 2061-6 provides excellent heat resistance, impact strength, and processability. CALIBRE 2061-6 resin is compliant with ISO 10993 (Biological Evaluation of Medical Devices) and is suitable for use in approved medical applications. This product contains mold release and is currently available in black color.

Main Characteristics:  
• ISO 10993  
Applications:  
• Medical applications  
总体  
材料状态 • 已商用：当前有效 
资料 1 •  Technical Datasheet

UL Yellow Card 2 •  E54680-101090285

Search for UL Yellow Card •  Styron LLC

 •  CALIBRE™

  
供货地区 • 北美洲 
添加剂 • 脱模 
机构评级 • ISO 10993 3 
形式 • 颗粒料 

 物理性能  额定值单位制 测试方法
 比重  1.20g/cm³ ASTM D792
 熔流率 (300°C/1.2 kg) 6.0g/10 min ASTM D1238
 收缩率 - 流动 0.50 到 0.70% ASTM D955
 吸水率   ASTM D570
 23°C, 24 hr 0.15% 
 平衡, 23°C, 50% RH 0.32% 
 机械性能  额定值单位制 测试方法
 拉伸模量 5 2410MPa ASTM D638
 抗张强度 5  ASTM D638
 屈服  62.1MPa 
 断裂  68.3MPa 
 伸长率 5   ASTM D638
 屈服  6.0% 
 断裂  150% 
 弯曲模量 6 2410MPa ASTM D790
 弯曲强度 6 96.5MPa ASTM D790
 耐磨耗性  45% ASTM D1044
 冲击性能  额定值单位制 测试方法
 悬壁梁缺口冲击强度 (23°C) 850J/m ASTM D256
 无缺口悬臂梁冲击 (23°C) 无断裂 ASTM D256
 装有测量仪表的落镖冲击 (23°C, 总能量) 89.3J ASTM D3763
 拉伸冲击强度 (23°C) 567kJ/m² ASTM D1822
 硬度  额定值单位制 测试方法
 洛氏硬度   ASTM D785
 M 计秤  73 
 R 计秤  118 
1 / 3   
 
CALIBRE™ 2061-6
Polycarbonate Resin
Styron LLC   
      
  热性能 额定值单位制 测试方法 
     
  热变形温度  ASTM D648 
  0.45 MPa, 退火 145°C   
  1.8 MPa, 未退火 129°C   
  1.8 MPa, 退火 142°C   
  维卡软化温度 156°C ASTM D1525 7 
  线形膨胀系数 - 流动 (-40 到 82°C) 0.000068cm/cm/°C ASTM D696 
  电气性能 额定值单位制 测试方法 
  体积电阻率 2.0E+17ohm•cm ASTM D257 
  介电强度 17kV/mm ASTM D149 
  介电常数  ASTM D150 
  60 Hz 3.00   
  1 MHz 3.00   
  耗散因数  ASTM D150 
  50 Hz 0.0010   
  1 MHz 0.0020   
  可燃性 额定值单位制 测试方法 
  极限氧指数 8 26% ISO 4589-2 
      
  注射 额定值单位制   
  干燥温度 121°C   
  干燥时间 3.0hr   
  建议的最大水分含量 0.020%   
  建议的最大回制料比例 25%   
  螺筒后部温度 271 到 288°C   
  螺筒中部温度 277 到 299°C   
  螺筒前部温度 299 到 327°C   
  射嘴温度 299 到 327°C   
  加工（熔体）温度 299 到 327°C   
  模具温度 76.7 到 110°C   
  螺杆转速 40 到 70rpm   
  合模力 2.8 到 6.9kN/cm²   
  螺杆长径比 15.0:1.0   
  螺杆压缩比 1.5:1.0 至 3.0:1.0   

备注
1 通过这些链接您能够访问供应商资料。我们尽量保证及时更新资料；不过您可以从供应商处了解最新资料。

2 A UL Yellow Card contains UL-verified flammability and electrical characteristics. UL IDES continually works to link Yellow Cards to individual plastic materials in Prospector, however this list may not include all of the appropriate links. It is important that you verify the association between these Yellow Cards and the plastic material found in Prospector. For a complete listing of Yellow Cards, visit the UL Yellow Card Search.

3 Biocompatibility testing following ISO Guidelines 10993 has been completed on select classic resins in this series. Please consult Dow for details. ISO guidelines include a sensitization test.

4 一般属性：这些不能被视为规格。

5 51 mm/min

6 方法 I (三点负荷), 2.0 mm/min

7 标准 A (50°C/h), 压 力2 (50N)

8 This rating not intended to reflect hazards presented by this or any other material under actual fire c